Advertisement
To connect to a network
• For Wireless LAN Module operation setup, please refer to Setup Instructions Manual.
To maximise comfort while sleeping
SLEEP
• This operation provides you with a comfortable environment while sleeping. It will automatically adjust
the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if the indicator
brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the respective button until the sleep timer reaches 0.0h.
To set the timer
You can set the timer to turn on and off the unit at 2 different preset time.
1
2
3
ON
SET
TIMER
OFF
CANCEL
1 Select TIMER ON or
TIMER OFF.
• Each time pressed:
(exit setting)
2 Set the time.
3 Confi rm the setting.
Note
POWERFUL/
SLEEP
,
,
• Can be selected at the same time.
• Can be activated in all modes.
Example:
OFF at 22:00
OFF
SET
ECO
See "To Learn More..." for details.
• To cancel the timer, press
select the respective setting
press
.
CANCEL
• If the timer has been cancelled manually or
due to power failure, you can restore the
timer again. Press
respective setting
• The nearest timer setting is displayed and
will activate in sequence.
• The timer operation follows the clock
setting on the remote control and will
repeat daily when timer has been set.
For clock setting, refer to Quick Guide.
FAN SPEED/
POWERFUL/
,
QUIET
ECO
• POWERFUL, QUIET and FAN SPEED
cannot be selected at the same time.
or
to
ON
OFF
or
, then
or
to select the
ON
OFF
or
, then press
SET
.
31
Advertisement
