Basic Operation - Kenwood ProTalk LT PKT-23 Easy Programming Instructions

■ Basic Operation

BASIC
4
Function 1 Key
2
PTT Switch
1
Power Switch
❶
Hold for 2 seconds to turn the radio power ON and OFF.
Momentarily press while the radio is ON to see the Battery Level
Guide.
❷
Press and hold, then speak into the microphone to transmit.
❸
Press these keys to adjust the volume, change the channel, and
select options form the list in the self-programming mode.
❹
6
LED Indicator
Press this key to activate/deactivate channel scan. Hold for 2
seconds to activate Super Lock-P function. Other functions can be
assigned from the function list. [refer to PF Key Assignment]
5
Function 2 Key
❺
Hold this key for 2 seconds to stop / start monitoring QT/DQT.
Another function can be assigned from the function list. [refer to PF
3
UP/Down Keys
Key Assignment]
❻
Indicate various status/functions of the radio.
7
Voice Guide
[RED] Transmitting, [GREEN] Receiving a call,
& Beep Tone
[Blinking
❼
Notify various status/functions of the radio.
Power Switch
PTT Switch
UP/DOWN Keys
Programmable Function Key #1
Programmable Function Key #2
LED Indicator
BLUE] Standby, [Blinking
Voice Guide & Beep Tone
RED] Low Battery