Kenwood ProTalk LT PKT-23 Easy Programming Instructions page 9

■ Self Programming Mode
SELF PROGRAMMING
First, turn Off the radio,
then operate keys to enter each mode.
[PF1]
Increase VOX level
[PF2]
VOX ON/OFF per Channel
Self Programming Timer is 20 seconds
Mode Entry
1. Hold PWR + UP to enter the mode.
Indications
1. Yellow LED lights.
2. Announces "VOX"
Operations
1. Use [PF1] key to increase the vox gain level
and voice will announce the level (Total 5
level).
2. Use the [Up] & [Down] to select the channel to
configure the VOX per channel status
3. In the selected channel, press [PF2] to control
VOX ON/OFF of the channel.
4. To exit and save, hold [PTT] for 3 sec.,
confirmation tone sounds and radio is reset
and back to normal operation.
5. To exit without save, press & hold [PWR].
Power off tone sounds and radio is off.
Select Channel [Up]
Select Channel [Down]