3. Using Your Monitor without a Smart Device
3.
Remain still and do not move or talk until the entire measurement
process is completed.
As the cuff inflates, your monitor automatically determines your ideal inflation
level. Your monitor detects your blood pressure and pulse rate during inflation.
The heartbeat symbol flashes at every heartbeat.
After your monitor has detected your blood pressure and pulse rate, the cuff
automatically deflates. Your blood pressure and pulse rate are displayed.
If either the systolic or the diastolic reading is high (refer to sub-section 1.4), the
number and indicator will be shown in red.
Place the monitor
over your heart.
Note
• To stop a measurement, press any button.
• Wait 2-3 minutes between measurements. The wait time allows the arteries
to decompress and return to their pre-measurement state. You may need
to increase the wait time depending on your individual physiological
characteristics.
29
SYS
mmHg
67
DIA
mmHg
mmHg
PULSE
/ min
5/17
118
78
70
8:38
AM