Omron HeartGuide BO8000-L Instruction Manual page 29

2.
Adjust the position of your wrist.
Place your monitor over your heart
while a measurement. Once the heart
zone indicator appears, raise or lower
your wrist until it is at heart level. Make
sure your wrist is about 2 inches apart
from your chest. When your wrist is in the
proper position, your monitor will vibrate
once. After approximately 2 seconds,
the monitor will start a measurement
and the cuff will start to inflate. If the
monitor is too high above your heart,
your blood pressure will be artificially
low. If the monitor is too low below
your heart, your blood pressure will be
artificially high.
Note
• DO NOT make the band and your body touch while taking a measurement.
• After approximately 5 seconds your monitor will start a measurement
and the cuff will start to inflate, even when your monitor is not positioned
properly.
• For more information about the heart zone indicator, refer to "Heart Zone
Indicator" on page 30.
3. Using Your Monitor without a Smart Device
2 inches
space
28