Creating the OmniBook Hardware Diagnostics Floppy
Diskette Locally
For an OmniBook 3000 or OmniBook Sojourn PC, you can create the OmniBook
Hardware Diagnostics floppy diskette locally. After inserting a formatted floppy
diskette in the floppy drive, do one of the following to create an OmniBook
Hardware Diagnostics floppy diskette:
On an OmniBook with a factory software installation, run
\Dmi\Hpdiags directory on the hard disk. To do this in Windows, double-click
the file.
–or–
For an OmniBook with TopTools installed, click Start, Programs, HP DMI,
HP TopTools. Use the DiagTools tab to create the diskette.
On any computer with a CD-ROM drive, run
\Omnibook\Drivers\Hputils or \OmniBook\Dmi\Hpdiags directory on the
Recovery CD that came with the OmniBook PC. To do this in Windows, double-
click the file.
Starting OmniBook Hardware Diagnostics
from the
from the
1-3