Starting OmniBook Hardware Diagnostics
Starting OmniBook Hardware Diagnostics
Once you have created the diskette, you can start the Hardware Diagnostics. To do
this:
1. Insert the diskette into the flexible disk drive.
2. Quit all applications, shut down the operating system, and restart your PC. To do
this in Windows 95 or Windows NT 4.0, click the Start button then select Shut
Down – Restart PC.
3. The PC will then start from the diskette. After loading the system files, it will
decompress the necessary files. Then OmniBook Hardware Diagnostics will start
automatically, displaying the Welcome screen (refer to page 1-7).
If There is a Problem
You may experience one of the following problems:
This happens when the PC ignores the diskette and starts from the hard disk drive as
normal, running your operating system. The problem could be:
The BIOS Setup program of your PC may not be correctly configured. Ensure
that the option to start from the flexible disk is enabled and that it is the first boot
device. (Refer to "More Information About the PC's Setup Program" on page
1-5.)
There may be problem with the flexible disk drive or the internal cable
connections. Contact your local or HP-dedicated support agent.
This means that the PC cannot find the system files on the diskette. The problem
could be:
The diskette may be damaged or corrupted. Select another diskette and create
another Hardware Diagnostics diskette (refer to page 1-2).
1-6