HP OmniBook 2000 User Manual page 33

3. Depending on the test selected, the test may start immediately. Alternatively, a
window of test parameters is displayed.
To change a test parameter, select the parameter and press ENTER. You can
then select between the available values for that parameter. We recommend that
you change these configuration values only if you are familiar with their
meaning and purpose.
To proceed with the test, select Continue.
Press ESC to abort the test while it is running. Some tests are critical and cannot be
aborted. If you abort the test, the message "Test Aborted" is displayed.
Once the test has completed, a window appears indicating the result: Test Passed or
Test Failed. The window also has several command options so that you can select
your next action:
Return to Main Menu: to return to the main screen, allowing you to run another
test.
Browse Current Test Errors: to browse the errors produced in the test you have
just done.
Browse All Test Errors: to browse all the errors that have arisen since you started
the advanced system tests (or since you last erased the error list).
Erase Error List: to delete the complete list of errors.
Advanced System Tests
4-5