To Remove A Pc Card - HP OmniBook 2000 User Manual

To remove a PC card

Caution
Never remove an I/O card while an application is open that's set up to use that
card. Exit the application first. If you remove the card, the application (or the
OmniBook) might behave unpredictably or stop responding until you restart
the OmniBook.
Never insert or remove a plug-in card while the PC card drive is actively
reading or writing data. Wait until the PC card drive is done. Otherwise, you
could lose data or the OmniBook could stop responding.
1. Click the PC card indicator in the taskbar, then click Stop.
This protects your data and avoids unexpected problems. You can restart the
card by removing it, then inserting again.
2. If necessary, rotate the ejector button so that it protrudes from the case.
3. Press the black ejector button until the card pops out, then pull out the card.
27