To Insert And Eject A Floppy Disk; To Install The Cd-Rom Drive - HP OmniBook 2000 User Manual

To insert and eject a floppy disk

When the OmniBook is reading or writing data to the floppy drive,
the floppy disk indicator appears on the Status Panel.
Caution
Do not insert or remove a floppy disk while the OmniBook is actively reading
or writing data. Wait until the floppy drive is done. Otherwise, you could lose
data or the OmniBook could stop responding.
Hold the disk with its face up, then slide it into the floppy drive slot until it clicks
into place.
To remove the floppy disk, press the eject button.

To install the CD-ROM drive

1. Important
Save your work—you'll be resetting the OmniBook.
2. If necessary, remove the floppy drive
OmniBook.
3. Slide the CD-ROM drive into the OmniBook until it clicks into place.
4. Press the square Off button, then press the blue On/Suspend button to
the OmniBook.
–or–
or high-capacity battery from the
restart
24