Specifications - U.S. Stove Ashley AP5770 Owner's Manual

HEATING SPECIFICATIONS
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
BTU
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
DIMENSIONS
Height
Width
Depth
Weight
FIREPLACE INSERT
Height
Width
Depth
Weight
Flue Size
* Approved installations: zer0-clearance, masonry, as a built-in.
ELECTRICAL SPECIFICATIONS
Electrical Rating
Watts (operational)
Watts (igniter running)
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries
standards. (Minimum of 40 lbs density per cubic ft, 1/4" to 5/16" diameter, length no greater than 1.5", not less than
8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets
that are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the space
required for refueling and ash removal. Doing so could result in a house fi re.
Do not over fi re or use volatile fuels or combustibles, doing so may cause a personal and property damage hazards.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. Your stove conforms to ASTM E 1509, and Certifi ed to ULC S627, and(UM) 84-HUD by INTERTEK
Testing Services in Fairview, Oregon USA.

SPECIFICATIONS

1.5 lbs./hr. (0.5 kg/hr)
40 hrs. (approximate)
60 lbs. (55kg)
up to 48,000
44.5 in. (1130mm)
23 in. (584mm)
23.5 in. (597mm)
245 lbs. (111.1kg)
24" (With Flashing: 32")
22" (With Flashing: 44")
8.5"
182.5 Lbs. (Flashing 15.5 Lbs)
3" to 4"
110-120 volts, 60 HZ, 3.0 Amps
180
346
5