System Configuration Menu; Diagnostics Menu - HP Mini 1000 Maintenance And Service Manual

System Configuration menu

Select
Language Support
Processor C4 State
Boot Options

Diagnostics menu

Select
Hard Disk Self Test (select models only)
Memory Test
68 Chapter 5 Setup Utility
To do this
Change the Setup Utility language.
Enable/disable the processor C4 sleep state.
Set the following boot options:
●
f10 and f12 Delay (sec.)—Set the delay for the
Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
●
Internal Network Adapter boot—Enable/disable boot from Internal Network
Adapter.
● Boot Order—Set the boot order for:
◦
Internal hard drive (select models only)
◦
USB Floppy
◦
USB CD/DVD ROM Drive
◦
USB Diskette on Key
◦
USB Hard drive
◦
USB Card Reader
◦
Network adapter
To do this
Run a comprehensive self-test on the hard drive.
Run a diagnostic test on the system memory.
f10 and f12 functions of the