Restoring Your Information; Using System Restore - HP Mini 1000 Maintenance And Service Manual

Hp mini 1000: supplementary guide
Hide thumbs Also See for Mini 1000:
Table of Contents

Advertisement

Restoring your information

In case of system failure or instability, you can restore the operating system and programs installed at
the factory.
CAUTION:
created and any software installed on the device are permanently removed. The restore process
reinstalls the original operating system, software, and drivers. Software, drivers, and updates not
installed with the factory image must be reinstalled using Update Manager.
The device provides the following restore options:
System Restore (installed on the device): You can use the System Restore utility to restore the
original operating system and programs.
HP MIE Restore Image Creator (USB flash drive): If you are unable to boot (start up) the device,
and if you are unable to use System Restore, you can use another computer to download the HP
MIE Restore Image Creator utility and create a bootable USB flash drive (purchased separately).
You can then use the USB flash drive to install the HP MIE operating system and programs on
your device.
Note the following before beginning the restore process:
The device must be connected to AC power during the restore process.
The restore process may take several hours to complete.
If possible, all personal files should be backed up.

Using System Restore

NOTE:
System Restore is the recommended option to restore the original operating system.
To restore the original operating system and programs using the System Restore utility that is installed
on the device, follow these steps:
1.
Turn on or restart the device, and then press the
Options" message is displayed in the lower-left corner of the screen.
The "System Restore" page opens.
2.
Use the arrow keys to select System Restore, and then press enter.
3.
Follow the on-screen instructions to restore the system.
94
Chapter 8 Backup and restore
The restore process reformats and completely erases the hard drive. All the files you have
esc
key repeatedly while the "F10 = BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents