13. ENVIRONMENTAL CONCERNS..............28 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp •...
ENGLISH 2.4 Use • Make sure not to cause damage to the mains plug and to the mains • Do not put flammable products or cable. Should the mains cable need to items that are wet with flammable be replaced, this must be carried out products in, near or on the appliance.
ENGLISH 3.1 Beam-on-Floor 3.2 Internal light The Beam-on-Floor is a light that is The appliance has an internal lamp. It displayed on the floor below the comes on when you open the door or appliance door. switch the appliance on while the door is open.
4.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refill‐ ing. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Before first use".
ENGLISH programme. The option increases the CAUTION! wash temperature and duration. Make sure that the items placed in the SprayZone GlassCare area do not block the upper spray arm. GlassCare prevents delicate load, glassware in particular, from damaging. ExtraPower The option prevents rapid changes in the dishwashing temperature of the selected ExtraPower improves the programme and reduces it to 45 °C.
Programme Dishwasher Degree of Programme phases EXTRAS load soil AUTO Crockery, • Prewash Not applicable Sense cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry Machine For cleaning the appliance •...
ENGLISH Number Setting Values Description Water hard‐ From level 1L Adjust the level of the water softener ac‐ ness to level 10L cording to the water hardness in your (default: 5L) area. Rinse aid level From level 0A Adjust the level of the rinse aid accord‐ to level 6A (de‐...
The appliance returns to the programme How to change a setting selection. The saved settings remain valid until you Make sure the appliance is in setting change them again. mode. 1. Use Previous or Next to select the 6.2 The water softener...
ENGLISH the total energy consumption of a Multi-tabs containing salt are programme by additional 2 Wh. The not effective enough to rinsing of the softener ends with a soften hard water. complete drain. Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to...
6.5 AirDry CAUTION! If children have access to AirDry improves the drying results. The the appliance, we advise to appliance door opens automatically deactivate AirDry. The during the drying phase and remains automatic opening of the ajar. door may pose a danger.
ENGLISH 7.2 How to fill the rinse aid How to fill the salt container dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3.
Page 16
8.1 Using the detergent 8.2 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on.
ENGLISH 8.7 How to cancel the delay By default, options must be start while the countdown activated every time before operates you start a programme. If the latest programme selection is enabled, the Press and hold for about 3 seconds. saved options are activated The appliance returns to the programme automatically along with the...
8.10 The Auto Off function 8.11 End of the programme This function saves energy by switching When the programme is complete, the the appliance off when it is not operating. display shows 0:00. The function comes into operation The Auto Off function switches the automatically: appliance off automatically.
ENGLISH 9.5 Loading the baskets • Make sure that the water softener level is correct. If the level is too high, • Always use the whole space of the the increased quantity of salt in the baskets. water might result in rust on cutlery. •...
10.1 Machine Care 10.3 Removal of foreign objects Machine Care is a programme designed Check the filters and the sump after each to clean the appliance interior with use of the dishwasher. Foreign objects optimal results. It removes limescale and (e.g.
ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
ENGLISH 10.8 Cleaning the ceiling spray 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the We recommend to clean the ceiling spray delivery tube (A), turn the mounting arm regularly to prevent soil from element (B) counterclockwise and clogging the holes.
Page 24
Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
Page 25
ENGLISH Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
Page 26
Once you have checked the appliance, The PNC can be found on the rating deactivate and activate the appliance. If plate on the appliance door. You can the problem occurs again, contact an also check the PNC on the control panel.
Page 27
ENGLISH Problem Possible cause and solution There are stains and dry wa‐ • The released quantity of rinse aid is not sufficient. ter drops on glasses and Adjust the rinse aid dosage to a higher level. dishes. • The quality of the rinse aid can be the cause. The interior of the appliance •...
Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 200 - 240 Electrical connection...
Need help?
Do you have a question about the EEZ69410L and is the answer not in the manual?
Questions and answers