Table of Contents
Advertisement
10
www.aeg.com
Button
5.6 Heat-up indicator
When you activate an oven function, the
bars in the display
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function
00:00
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
Function
PLUS
come on one by
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
COUNT UP TIMER
and
or
to set the hours.
to confirm and switch to set
and the set
or
to set the current
Description
To set the time.
one. The bars show that the oven
temperature increases or decreases.
Application
To show or change the time of day. You can change the
time of day only when the appliance is off.
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
Combination of DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day
6.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
to confirm or the set time of
flashes in the display.
again and again until
Advertisement
Table of Contents
