Table of Contents
Advertisement
16.
Remove the display panel (2) from the display enclosure. The display panel is available using
the spare part number 612097-001.
Reverse this procedure to install the display panel.
17.
To replace the display panel brackets, remove the three Phillips PM2.0×3.0 screws (1) that
secure each bracket to the display panel.
18.
Remove the display panel brackets (2) from the display panel. The display panel brackets are
available using spare part number 612104-001.
Reverse this procedure to install the display panel brackets.
19.
To replace the wireless antenna transceivers, lift up on the silver transceiver (1) and release the
adhesive material from the display cover (2).
ENWW
Component replacement procedures
73
Advertisement
Table of Contents
