Turning The Touchpad On And Off; Using Touchpad Gestures - HP G72-B50 User Manual

Turning the TouchPad on and off

When the TouchPad zone is active, the light is off. To turn the TouchPad on and off, quickly double-tap
the TouchPad off indicator.
To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer
to go. use the left and right TouchPad buttons like the corresponding buttons on an external mouse. To
scroll up and down using the TouchPad scroll zone, slide your finger vertically along the right edge of
the TouchPad.
NOTE: If you are using the TouchPad to move the pointer, you must lift your finger off the TouchPad
before moving it to the scroll zone. Simply sliding your finger from the TouchPad to the scroll zone will
not activate the scrolling function.

Using TouchPad gestures

The TouchPad supports a variety of TouchPad gestures. To activate the TouchPad gestures, place two
fingers on the TouchPad as described in the following sections.
To enable or disable gestures, double-click the Synaptics icon in the notification area, at the far right
of the taskbar, and then check or uncheck Disable gestures. To enable or disable a specific gesture,
select Control Panel > Hardware and Sound > Mouse > Device settings > Settings, and then check
or clear the check box next to the gesture you want to enable or disable.
Turning the TouchPad on and off 29