HP G60-231 Maintenance And Service Manual page 86

g. Display assembly (see
h. Top cover (see
i. Bluetooth module (see
j. System board (see
k. Fan/heat sink assembly (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
✎
When you install the processor, the gold triangle on the processor 3 must be aligned with the triangle embossed
on the processor slot 4.
Reverse this procedure to install the processor.
Removal and replacement procedures
"Display assembly" on page
"Top cover" on page 4-30)
"Bluetooth module" on page
"System board" on page
"Fan/heat sink assembly" on page
4-23)
4-35)
4-38)
4-41)
4–45