Setting Up The Software - Compaq Evo N400c Hardware Manual

Hardware and Software Setup

Setting Up the Software

Read the following guidelines, then set up the software:
Ä
CAUTION: To prevent file corruption and ensure that the correct drivers
install during initial setup:
Do not unplug the computer from the electrical outlet
Do not shut down the computer.
Do not remove or insert a drive.
When you begin software setup, online instructions guide
you through the setup process.
After you have begun software setup, you must complete the
entire process. Setup time varies by computer configuration.
If you are prompted to select a language or operating system,
choose carefully.
The languages and operating systems that you do not choose will
be deleted from the system and cannot be restored during initial
setup. An operating system available during initial setup is
enhanced by Compaq. When an operating system is deleted, the
enhancements are also deleted.
You may be prompted to accept the Product Key.
1–6 Hardware Guide