INSTALLATION
9
INSTALLATION
9.1
Appliance installation
» Mark out the holes to be drilled on the wall (see chapter "Installation / Specification / Dimensions
and connections").
» Drill the holes and insert suitable rawl plugs.
» Secure the wall mounting bracket using suitable screws.
» Hang the appliance on the wall mounting bracket.
9.2
Water connection
Material losses
!
Carry out all water connection and installation work in accordance with regulations.
Material losses
!
The appliance may develop a leak and cease functioning. A leaky appliance can result
in water damage.
» Never subject the appliance to water pressure.
» Never interchange the water connections.
» Set the flow rate (see tap instructions). Observe the maximum permissible flow rate
with a fully opened tap (see chapter "Installation / Specification / Data table").
Material losses
!
Counterhold with a suitable spanner when tightening fittings.
E
35
85
°C
19
22
E
8 5
C °
3 5
GB
9