Safety; General Safety Instructions; Instructions, Standards And Regulations; Appliance Description - Oras Safira Installation And Maintenance Manual

INSTALLATION
6

SAFETY

Only a qualified contractor should carry out installation, commissioning, maintenance and repair of the
appliance.
6.1

General safety instructions

We guarantee trouble-free function and operational reliability only if original accessories and spare parts
intended for the appliance are used.
6.2

Instructions, standards and regulations

Note
Observe all applicable national and regional regulations and instructions.
7

APPLIANCE DESCRIPTION

The open vented (non-pressurised) appliance is only suitable for undersink installation. The appliance is
intended to heat cold water and supply it to a single draw-off point. The appliance must only be installed
with an open (non-pressurised) tap.
7.1

Standard delivery

Delivered with the appliance are the following:
- Wall mounting bracket
8

PREPARATIONS

» Flush the water line thoroughly.
Water installation
A safety valve is not required.
Taps/valves
Sealed unvented taps are not permitted.
» Install an open vented tap.
8.1

Installation site

Material losses
!
Install the appliance in a room free from the risk of frost.
» If dismantled, store the appliance in a room free from the risk of frost, as water resi-
dues remaining inside the appliance can freeze and cause damage.
Material losses
!
Mount the appliance on the wall. The wall must have a sufficient load-bearing capacity.
Note
The appliance is only suitable for undersink installation. The water connections of the
appliance point upwards.
Always install the appliance vertically and near the draw-off point.
8
GB