INSTALLATION
Match up the colour coding on the tap water connections and the appliance:
- R.h. side blue = "Cold water inlet"
- L.h. side red = "DHW outlet"
» Secure the water connections from the tap to the appliance.
Note
Ensure that the water connections are not kinked during installation. Prevent any ten-
sioning during installation.
9.3
Power supply
WARNING Electrocution
Carry out all electrical connection and installation work in accordance with relevant reg-
ulations.
WARNING Electrocution
When permanently connected to the power supply using a dedicated junction box, the
appliance must be able to be isolated from the mains power supply by an isolator that
disconnects all poles with at least 3 mm contact separation.
WARNING Electrocution
Ensure that the appliance is earthed.
Material losses
!
The voltage specified on the type plate must match the mains voltage.
» Observe the type plate.
The following electrical connections are permissible:
Connection to a freely accessible standard socket with matching plug
Permanent connection to an appliance junction box with earth conductor
10
COMMISSIONING
WARNING Electrocution
Commissioning may only be carried out by a qualified contractor in accordance with
safety regulations.
10.1
Initial start-up
10
GB
Oras 5
X
X