General Information; Safety Instructions; Other Symbols In This Documentation; Units Of Measurement - Oras Safira Installation And Maintenance Manual

OPERATION
1

GENERAL INFORMATION

The chapters "Special Information" and "Operation" are intended for both the user and qualified con-
tractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appliance and retain them for future
reference.
Pass on the instructions to any new user where appropriate.
1.1

Safety instructions

1.1.1 Layout of safety instructions
KEYWORD Type of risk
!
Here, possible consequences are listed that may result from failure to observe the safety
instructions.
» Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.2

Other symbols in this documentation

Note
General information is identified by the adjacent symbol.
» Read these texts carefully.
Symbol
Material losses
!
(appliance damage, consequential losses and environmental pollution)
Appliance disposal
» This symbol indicates that you have to do something. The action you need to take is described step
by step.
1.3

Units of measurement

Note
All measurements are given in mm unless stated otherwise.
4
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information
will result in serious injury or death.
WARNING Failure to observe this information
may result in serious injury or death.
CAUTION Failure to observe this information
may result in non-serious or minor
injury.
GB