Electrical Information; Identification Of Parts; Accessories - d2itsu APD-9CR User Manual

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
- Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not
remove any prong from the power cord.
- Be sure the electrical service is adequate for the model you have chosen. This information can be
found on the serial plate, which is located on the side of the cabinet and behind the grille.
- Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper
grounding is important. The power cord is equipped with a three-prong grounding plug for
protection against shock hazards.
- Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle
you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker,
have a qualified electrician install the proper receptacle.
- Ensure the receptacle is accessible after the unit installation.

Accessories

PARTS
or
NOTE: Optional parts (*), some models without
- Check all the accessories are included in the package and please refer to the installation
instructions for their usage.
NOTE: All the illustrations in this manual are for explanation purpose only. Your air conditioner
may be slightly different. The actual shape shall prevail.
4
For your safety

Electrical information

Exhaust hose and ApaptorI and Adaptor B
(flat mouth or round mouth :depending on
Expansion Plug and wooden screw (*)
Drain hose and drain hose adaptor (*)

IDENTIFICATION OF PARTS

PARTS NAME
models)
Window Slider Kit and bolt
Wall Exhaust Adaptor A(*)
Adaptor B(round mouth)(*)
Foam seal
Remote Controller and Battery
(For remote control models only)
QUANTITY
1 set
1 pc
1 pc
4 / pc
3 / pc
1 pc
1 pc