d2itsu APD-9CR User Manual page 15

Foam steal
10
INSTALLATION INSTRUCTIONS (optional)
Foam seal A
(adhesive type)
Fig. 8
Without kit
Without stool
Fig. 9
Without kit
Without stool
Fig. 10
Fig. 11
Installation in a double-hung sash
window
1. Cut the foam seal(adhesive type) to the
proper length and
attach it to the window stool. Fig.8
2. Attach the window slider kit to the window
stool. Adjust the
length of the window slider kit according to the
width of window, shorten the adjustable window
kit if the width of window is less than 26.5
inches
Open the window sash and place the window
slider kit on the window stool. Fig.9
3. Cut the foam seal(adhesive type) to the
proper length and attach it on the top of the
window. Shown as in Fig.10
4. Close the window sash securely against the
window.
5. Cut the foam seal to an appropriate length
and seal the open gap between the top window
sash and outer window sash. Shown as in
Fig.11.