How To Set Noise Reduction; How To Set Pip [Mode]; How To Set Pop [Mode] - Hyundai ImageQuest LT17AW000 User Manual

How to Set Noise Reduction

Noise Reduction is to eliminate some noise on the screen and It is not applied to Component and PC mode.
Press Menu button.
MENU
Menu items appear on the screen.
1 Press Left and Right buttons to select
"Picture icon".
Press Up and Down buttons to move to
2
"NOISE REDUCT".
Press Left and Right buttons, then the menu
3
changes in order below.
OFF MIDDLE STRONG
Press MENU button after the setting is done, and Menu goes to the previous menu.
EXIT
If the EXIT button is pressed, the menu disappears.
OFF : For a normal screen.
MIDDLE : For a reduced noise on the screen.
STRONG : For a reduced a lot of noise on the screen.
In the noise reduction, the more you reduce the screen noise, the more sharpness level of the picture may
become degrade.
35

How to Set PIP [Mode]

- You can watch another device's image in the PIP while watching the main image.
- This function is available only with the remote control.
MODE USER
CONTRAST 30
BRIGHTNESS 20
COLOR 25
TINT 25
SHARPNESS 20
NOISE REDUCT OFF
MOVE SELECT MENU
MODE USER
CONTRAST 30
BRIGHTNESS 20
COLOR 25
TINT 25
SHARPNESS 20
NOISE REDUCT OFF
MOVE SELECT MENU

How to Set POP [Mode]

- You can watch another device's image in the POP while watching TV, VIDEO, S-VIDEO mode in the main image.
- This function is available only with the remote control.
HYUNDAI LCD TV HQL170WR/200NR
Press the PIP button.
PIP
You will see the PIP at the upper left corner.
Press the PIP button, then position
PIP
changes in order below.
Left Up Right Up Right Down
Left Down OFF
Press the SOURCE button, then PIP input source
SOURCE SOURCE
changes in order below.
SUB
TV VIDEO S-VEDIO
To deselect PIP function,
EXIT
Press EXIT button.
Press the POP button.
POP POP
You will see the POP at the Right.
Press the SOURCE button, then POP input source
SOURCE SOURCE
changes in order below.
SUB TV VIDEO S-VEDIO
To deselect POP function,
Press POP button once more or Press EXIT button.
EXIT
- Main and sub pictures cannot have the same input source.
- In case of TV mode, you can change the PIP TV channel by "P-CHANNEL" Button.
- In case of TV mode, you can change the POP TV channel by "P-CHANNEL" Button.
PIP
Main
1 2
4 3
Main POP
36