7.
Connect only to a code approved power source. Connect only to a grounding power
source conforming to the National Electrical Code and Local Codes.
8.
Wear proper clothing when welding. Use flameproof, welding-type gloves. Wear
cuffless pants and pocketless shirt. Both must be free of oil and grease. Wear high-
topped, safety shoes with rubber soles.
When unpacking, check to make sure the following parts are included.
Brush Hammer
Handheld Shaded
Face Shield
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
SKU 55250
Unpacking
Handle (4)
Line Cord (14)
For technical questions, please call 1-800-444-3353.
Grounding Cable
with Clamp (15)
Welding Torch (16)
Wheels (29)
Axle (30)
Wire Spool not shown
Page 5