Synco Lav-S6R User Manual

User Manual
Microphone Lav-S6R
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.
Caring For Your SYNCO Product
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Operations
1. The Use of Wind Muff or Windshield
Please install the wind muff or windshield to the microphone for wind noise
suppression.
2. The Use of Microphone
1). Attach the mic to clothing via the tie clip.
2). Plug it into your devices' microphone jack.
The plug-and-play microphone provides a 3-pin XLRM connector, compatible
with XLR-equipped camera, recorder, or mixer. It is powered by 48V phantom
power supplied from the device.
3-pin XLRM
connector
Specifications
1. Polar Pattern: Omni-directional