Synco Lav-S8 User Manual

User Manual
Microphone Lav-S8
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions mentioned
herein.

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.

Operations

1. The Use of Wind Muff

Please install the wind muff to the microphone for
wind noise suppression

2. The Use of Microphone

1). Attach the mic to clothing via the tie clip.
2). Plug it into your devices' microphone jack.
Smartphone, Camera, Laptop 3.5mm Connector
iPhone 7 and subsequent Apple devices Apple's Lighting Adapter (excluded)
Some of Android devices Type-C Adapter (excluded)

3). Indicator

On
Battery Power
High
Working Status Normal
4). Run the audio/video recording application in your device. (Note: Some
android devices need the third-party applications to operate the microphone.)

3. Battery Replacement

SYNCO Lav-S8 uses a replaceable CR1220 battery. Please install or replace the
battery as shown below.

Specifications

1. Polar Pattern: Omni-directional
Off
Low
Abnormal