Using A Power-On Password; Setting A Power-On Password - HP Compaq tc1000 Software Manual

Using a Power-On Password

A power-on password prevents unauthorized use of the tablet PC.
Once set, it must be entered each time the tablet PC is turned on
or resumes from Hibernation.
If you use the same number combination for both a power-on
password and a DriveLock password, you are prompted for the
DriveLock password, but not the power-on password, when the
tablet PC starts up.

Setting a Power-On Password

To set a power-on password, an optional keyboard must be in the
system. The keyboard may be a tablet PC keyboard or a standard
keyboard connected by USB to the tablet PC.
A power-on password is set in the Setup utility.
1. To open the Setup utility, turn on or restart the tablet PC.
While the Compaq logo is displayed and a cursor is flashing
in the upper right corner of the screen, press the esc button on
the tablet PC, or press
To change the language, select Advanced > Languages. To
navigate and select, use the arrow and
2. To access the power-on password settings, select the Security
menu > Set Power-On Password, then press
3. Type any combination of up to 32 numbers in both fields,
then press
4. To save your preference and exit the Setup utility, select
File > Save Changes and Exit, then follow the instructions
on the screen.
Your preference is set as you exit the Setup utility and is in effect
when the tablet PC restarts.
Software Guide
F10
enter.
on an optional keyboard.
enter
Passwords
keys.
enter.
4–5