Table of Contents
Advertisement
PICTURE>>Basic Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Basic menu. Press ◄► to change values for settings.
Note:
Customizing the settings in PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode.
I
TEM
Display Mode
Brightness
Contrast
Color
Tint
Sharpness
Flesh Tone
Reset Picture Settings
Press the cursor ◄► buttons to set the Display Mode.
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3)
Press the cursor ◄► buttons to adjust the display brightness.
Press the cursor ◄► buttons to adjust the display contrast.
Press the cursor ◄► buttons to adjust the video saturation.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
Press the cursor ◄► buttons to adjust the video tint/hue.
Notes: This function is only available when Component, Video or S-Video with NTSC
system input source is selected.
Press the cursor ◄► buttons to adjust the display sharpness.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
Press the cursor ◄► buttons to adjust the display flesh tone.
Notes: This function is only available when Component, Video or S-Video input source is
selected.
Press the ENTER button to reset all settings to default values.
D
ESCRIPTION
– 23 –
P
r
e
f
a
c
e
P
r
e
f
a
c
e
P
r
e
f
a
c
e
Advertisement
Table of Contents
