HP Compaq Presario,Presario X1001 Maintenance And Service Manual page 50

Troubleshooting
Select
Device Options (continued)
*Video modes vary even within regions. However, NTSC is common in North
America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and
PAL-M, in Brazil. Other South and Central American regions can use NTSC,
PAL, or PAL-M.
2–6
Table 2-3
Advanced Menu (Continued)
To Do This
■ Change the parallel port mode from Enhanced
Parallel Port (EPP, the default setting) to
standard, bidirectional EPP, or Enhanced
Capabilities Port (ECP).
■ Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■ Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
notebook runs in Battery Optimized mode.)
■ Specify how the notebook recognizes multiple
identical Port Replicators that are identically
equipped. Select Disable to recognize the
Port Replicators as a single Port Replicator;
select Enable to recognize the Port Replicators
individually, by serial number.
■ Enable/disable the reporting of the processor
serial number by the processor to the software.
Maintenance and Service Guide