Selecting From The File Menu - HP Compaq Presario,Presario X1001 Maintenance And Service Manual

2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the notebook:
❏
- or -
❏
4. When you are prompted to confirm your action, press

Selecting from the File Menu

Select
System Information
Save to Floppy
Restore from Floppy
Restore Defaults
Ignore Changes and Exit
Save Changes and Exit
Maintenance and Service Guide
Select File > Save Changes and Exit and press
Select File > Ignore Changes and Exit and press
To Do This
■ View identification information about the
■ View specification information about the
Save system configuration settings to a diskette.
Restore system configuration settings from a
diskette.
Replace configuration settings in Computer Setup
with factory default settings. Identification
information is retained.
Cancel changes entered during the current
session, then exit and restart the notebook.
Save changes entered during the current session,
then exit and restart the notebook.
Table 2-1
File Menu
notebook, a Port Replicator, and any battery
packs in the system.
processor, memory and cache size, and
system ROM.
Troubleshooting
enter.
enter.
F10.
2–3