Table of Contents
Advertisement
U s e r I n s t r u c t i o n C o d e
Instruction
Code
Displayed
Close door
E r r o r C o d e s
Displayed
Error Code*
i10
i20;
i40;
iF0
i30
i50
i60
iC0
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for
5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-
9044.
Problem
This indicates the
door has been left
open or not properly
latched.
Problem
A low fi ll has been
detected.
Clogged fi lters or a
restricted drain line
has been detected.
A leak or overfl ow
of water has been
detected in the
bottom pan.
A problem has been
detected with the
drain or wash motor.
A problem has been
detected with the
water heating system.
A problem has been
detected with the
electronic control
system.
OPERATING INSTRUCTIONS
Solution
Ensuring the door is properly latched will clear the display.
This does not indicate a problem with your dishwasher
and service will not need to be contacted.
Solution
Look for a pinched water supply line, or water shutoff is
not completely opened.
Check and clean both fi lters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug has
been removed.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and the
unit can be restarted.
If this does not resolve the problem, service
will need to be called.
7
Advertisement
Table of Contents
