Connecting A 1394 Device; Stopping A 1394 Device; Required 1394 Software - HP Compaq Presario,Presario V6000 User Manual

Connecting a 1394 device

CAUTION
device.
To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You
will hear a sound when the device has been detected.
NOTE
displayed in the notification area, at the far right of the taskbar.

Stopping a 1394 device

CAUTION
before removing it.
CAUTION
1394 device.
To stop a 1394 device:
1. Double-click the Safely Remove Hardware icon in the notification area, at the far right of the
taskbar.
NOTE
(< or <<) in the notification area.
2. Click the name of the device in the list.
3. Click Stop.

Required 1394 software

Some 1394 devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.
4 Chapter 2 Using a 1394 device (select models only)
To prevent damage to a 1394 port connector, use minimal force to connect a 1394
The first time you connect a 1394 device, the "Found New Hardware" message is
To prevent loss of information or an unresponsive system, stop the 1394 device
To prevent damage to a 1394 connector, do not pull on the cable to disconnect the
To display the Safely Remove Hardware icon, click the Show Hidden Icons icon
ENWW