Modem module
Description
All countries and regions except for Australia and New Zealand
Australia and New Zealand
Before removing the modem module:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Top cover (see
Remove the modem module:
1.
Turn the computer upright with the front toward you.
2.
Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system
board.
64
Chapter 4 Removal and replacement procedures
Battery on page
44).
Hard drive on page
45)
Optical drive on page
Keyboard on page
55)
Top cover on page
58)
48)
Spare part number
510100-001
510100-011