Testing An Ac Adapter - HP Compaq Presario,Presario CQ62-200 User Manual

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms when it is connected to AC
power:
●
The computer does not turn on.
●
The display does not turn on.
●
The power light is off.
To test the AC adapter:
1. Remove the battery from the computer.
a. Shut down the computer and close the display.
b. Turn the computer upside down on a flat surface.
c. Slide the battery release latch (1) to release the battery.
d. Pivot the battery (2) upward and remove the battery from the computer (3).
2. Connect the AC adapter to the computer, and then plug it into an AC outlet.
3. Turn on the computer.
●
If the power light turns on, the AC adapter is functioning properly.
●
If the power light remains off, the AC adapter is not functioning and should be replaced.
Contact technical support for information on obtaining a replacement AC power adapter.
52 Chapter 5 Power management