Step 3: Discharge The Battery; Step 4: Fully Recharge The Battery - HP Compaq Presario,Presario CQ62-200 User Manual

Step 3: Discharge the battery

The computer must remain on while the battery is being discharged. The battery can discharge whether
or not you are using the computer, but the battery will discharge faster while you are using it.
●
If you plan to leave the computer unattended during the discharge, save your information before
beginning the discharge procedure.
●
If you use the computer occasionally during the discharge procedure and have set energy-saving
timeouts, expect the following performance from the system during the discharge process:
◦
The monitor will not turn off automatically.
◦
Hard drive speed will not decrease automatically when the computer is idle.
◦
System-initiated Hibernation will not occur.
To discharge a battery:
1. Unplug the computer from its external power source, but do not turn off the computer.
2. Run the computer on battery power until the battery is discharged. The AC adapter light begins to
blink when the battery has discharged to a low battery level. When the battery is discharged, the
AC adapter light turns off and the computer shuts down.

Step 4: Fully recharge the battery

To recharge the battery:
1. Plug the computer into external power and maintain external power until the battery is fully
recharged. When the battery is recharged, the AC adapter light on the computer turns off.
You can use the computer while the battery is recharging, but the battery will charge faster if the
computer is off.
2. If the computer is off, turn it on when the battery is fully charged and the AC adapter light has turned
off.
Using battery power 59