Sony STR-DN1080 Manual page 28

* Set the height of a tweeter of the front speaker at the same height as your ears.
Hint
As the subwoofer does not emit highly directional signals, you can place it wherever you want.
[18] Preparation 1. Installing speakers
Speaker configuration and speaker pattern settings
Select the speaker pattern according to the speaker configuration which you are using. The
table below shows examples of speaker configurations and speaker pattern settings.
Speaker configuration in each zone
Main zone
5.1-channel
7.1-channel using surround back
speakers
5.1.2-channel using top middle
speakers
5.1.2-channel using Dolby Atmos
enabled speakers
5.1-channel with Zone 2
connection
5.1-channel with bi-amplifier
connection
5.1-channel with front B speaker
connection
2.1-channel (for enjoying Front
Surround)
You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have
*1
surround back and height/overhead speakers.
*2 For USA and Canadian models only
For other models only
*3
Hint
The receiver allows you to enjoy a surround-sound effect acoustically equivalent to that of up to a
7.1.2-channel speaker system when you select [Type A] or [Type B] for
[Surround Back
Speaker Assign] (*1)
Zone 2
Not
-
used
Not
-
used
Not
-
used
Not
-
used
2-
[Off] (*2)/[Zone2] (*3)
channel
Not
[BI-AMP]
used
Not
[Front B]
used
Not
-
used
[Speaker
Pattern] setting
[5.1]
[7.1]
[5.1.2 (TM)]
[5.1.2 (FD)]
[5.1]
[5.1]
[5.1]
[2.1]