Sony STR-DN1080 Manual page 179

technologies to be transmitted over a BLUETOOTH wireless network with unprecedented sound
quality, by means of efficient coding and optimized packetization.
*1
excluding DSD format contents
*2 in comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps (88.2/44.1 kHz) is selected
[210] Adjusting Settings
Setting the BLUETOOTH sound quality (Wireless
Playback Quality)
You can set the transmission data rate for LDAC playback.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Wireless Playback Quality].
2
Select the setting you want.
3
Auto: Sets the transmission data rate for LDAC automatically.
Sound Quality: The highest data rate is used. Sound is sent at a higher quality, but
audio playback may become unstable if the link quality is not sufficient.
Standard: A medium data rate is used. This provides a balance between sound quality
and playback stability.
Connection: Stability is prioritized. The sound quality may be reasonable and the
connection status will most likely be stable. This setting is recommended if the
connection is unstable.
Note
This function is only available when [Bluetooth Mode] is set to [Transmitter] and [Bluetooth Codec -
LDAC] is set to [On].
[211] Adjusting Settings
Setting whether or not to display [Zone Controls] on
the home menu (Zone Controls)
You can set whether or not to display [Zone Controls] on the home menu by following the steps
below.
Select [Setup] - [Zone Settings] from the home menu.
1
Select [Zone Controls].
2
Bluetooth Settings
Zone Settings