Sony STR-DN1080 Manual page 175

You can check the Video & TV SideView devices which are able to control the receiver.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Registered Remote Devices].
2
Note
You can register up to 5 Video & TV SideView devices. If you want to add a new device when a
maximum of 5 devices are set, remove unnecessary devices before adding the new device.
[203] Adjusting Settings
Reducing the startup time (Network Standby) (for USA,
Canadian and Asia-Pacific models only)
If this function is set to [On], the startup time can be shortened and the receiver can be turned
on when it is detected from a device connected to the same network.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Network Standby].
2
Select [On] or [Off].
3
Note
If you agree to use the Chromecast built-in function, this function is set to [On] automatically.
[204] Adjusting Settings
Enabling the network function even when this receiver
is in standby mode (Remote Start) (for USA, Canadian
and Asia-Pacific models only)
If this function is set to [On], the receiver can be turned on by a device via the network when the
receiver is in standby mode.
Select [Setup] - [Network Settings] from the home menu.
1
Select [Remote Start].
2
Network Settings
Network Settings