Connecting Power - BenQ BH2401T User Manual

Connecting power

1. Plug the adapter into the DC IN jack on the display.
2. Plug one end of the power cord into the adapter and the other end into an
appropriate power outlet (if the outlet is switched, turn on the switch).
3. The power indicator on the bottom panel of the display will light up red then green,
and the display will automatically power on.
RS232
RJ45
DC IN
• The supplied power cord is suitable for use with 100-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which appears
damaged or frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• There are no user serviceable parts in this display. Never unscrew or remove any covers.
There are dangerous voltages inside the display. Turn off the power and unplug the power cord
if you intend to move the display.
Connection
HDMI cable
13
HDMI
USB