Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.
• When turning off the display by disconnecting the power cord, wait 6 seconds or more before reconnecting the power cord for normal operation. • Ensure the use of an approved power cord provided by BenQ at all times. If your power cord is missing, please contact your local service center.
Page 5
Important safety instructions Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
Package content Package content Packing list Bar type display x1 HDMI to DVI cable x 1 Power cord x1 Power adapter x 1 Overview Front view Back view Top view...
Package content Buttons Name Name Down button Menu button Up button Video source button Right button Power button Left button Power indicator LED I/O ports Name Name DC 12V output Serial port DC 24V input VGA port DVI port...
Setting up the display Setting up the display Once the power cord is connected to both the power outlet and the display, the power indicator LED is lit in red. When power button is pressed to turn on the display, the power indicator LED is lit in blue.
Setting up the display Img. Adj menu This menu is available image adjustments. Press down button to select category to change including Image Size and Freeze Frame. Press left or right buttons to adjust settings. Press menu button to exit. Setup menu This menu is available for OSD configurations.
Troubleshooting Troubleshooting Symptom Possible Cause Remedy No picture is displayed. 1. The power cord is Plug in the power cord. disconnected. Make sure the power switch is 2. The main power switched on. switch on the back of Connect a signal connection to the display is not the display.
Need help?
Do you have a question about the BH280 and is the answer not in the manual?
Questions and answers