Product Does Not Turn On Or Off; Noise After Filling The Ink; Software Installation Problems - Epson C11CG92201N User Manual

Table of Contents

Advertisement

Product Does Not Turn On or Off

Noise After Filling the Ink

Software Installation Problems

Parent topic:
Product Does Not Turn On or Off
If you cannot turn the product on or off, try these solutions:
• If you cannot turn on your product, make sure the power cord is securely connected and hold down
the power button a little longer.
• If you cannot turn off your product, hold down the power button a little longer. If you still cannot turn off
your product, unplug the power cord, plug the power cord back in, then turn your product on and off
again using the power button.
Parent topic:
Noise After Filling the Ink
If you hear noises from your product after filling the ink tank with ink, check these solutions:
• The first time you fill the tank with ink, the product must charge its print head. Wait until charging
finishes before you turn off the product, or it may charge improperly and use excess ink the next time
you turn it on. Your product is finished charging the print head when the
• If the product's print head stops moving or making noise, and the charging process has not finished,
turn off your product. Turn it back on and check to see if charging is still in progress. If it is still in
progress, contact Epson for help.
Parent topic:
Software Installation Problems
If you have problems while installing your product software, try these solutions:
• Make sure your product is turned on and any necessary cables are securely connected at both ends. If
you still have problems installing software, disconnect the cable and carefully follow the instructions on
the Start Here sheet. Also make sure your system meets the requirements for your operating system.
• Close any other programs, including screen savers and virus protection software, and install your
product software again.
• In Windows, make sure your product is selected as the default printer and the correct port is shown in
the printer properties.
Solving Problems
Solving Setup Problems
Solving Setup Problems
259
power light stops flashing.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et-m3170C11cg92201

Table of Contents