Diagnostics Menu
Select
Hard Drive Self-Test
options
Memory Check
Startup Check (select
models only)
System Configuration Menu
✎
Some of the listed System Configuration options may not be
supported by your computer.
Select
Language (or press
Boot options
Maintenance and Service Guide
Table 2-3
Diagnostics Menu
To do this
Run a comprehensive self-test on any hard drive in
the system or on any optional MultiBay hard drive.
Run a comprehensive check on system memory.
Verify the system components needed for starting the
computer.
Table 2-4
System Configuration Menu
To do this
f2
)
Change the Computer Setup language.
■ Set
f9
,
■ Enable/disable CD-ROM boot.
■ Enable/disable floppy boot.
■ Enable/disable internal network adapter boot and
set the boot mode (PXE or RPL).
■ Enable/disable MultiBoot, which sets a boot order
that can include most boot devices in the system.
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
f10
f12
, and
delay when starting up.
Troubleshooting
2–7