Navigating And Selecting In Computer Setup - HP Compaq NX7300 Maintenance And Service Manual

Troubleshooting
To start Computer Setup:
1. Turn on or restart the computer.
2. Before Windows® opens and while the "F10=ROM Based
Setup" message is displayed in the lower-left corner of the
screen, press
Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed
from the File, Security, Diagnostics, and System Configuration
menus.
1. Open Computer Setup by turning on or restarting the
computer, and then pressing
Setup" message is displayed in the lower-left corner of the
screen.
Because Computer Setup is not Windows-based, it does not
support the TouchPad. Navigation and selection are by
keystroke:
❏
❏
❏
❏
❏
2. Select the File, Security, Diagnostics, or System
Configuration menu.
2–2
.
f10
To choose a menu or a menu item, use the arrow keys.
To select an item, press
To close open dialog boxes and return to the main
Computer Setup screen, press
To view navigation information, press
To change the language, press
while the "F10 = ROM Based
f10
.
enter
.
esc
.
f2
Maintenance and Service Guide
.
f1