ViewSonic VS17351 User Manual page 39

M
Multi-picture
Under MULTI-PICTURE MODE you can select the following settings,
PBP LEFT-RIGHT, and PIP. The explanations for each setting are
below.
1. QUAD WINDOWS: You can select four picture split screen type.
2. PBP TOP-BOTTOM: You can select two picture split screen types,
and display two pictures side-by-sides on the top and bottom.
3. PBP LEFT-RIGHT: You can select 2 picture split screen types, and
display 2 pictures side-by-side on the left and right.
4. PIP: Two picture split screen types, display large and the small
pictures on the screen.
5. PIP SIZE: This controls the size of the sub-picture used in PIP.
6. PIP POSITION: This controls the position of sub-picture used in PIP
mode.
7. PIP SWAP: This swaps the main-picture source and the sub-picture
source.
8. SOURCE SELECT: This selects the source of the MULTI-PICTURE
use in the QUAD WINDOW, PBP TOP-BOTTOM, PBP LEFT-RIGHT
and PIP.
O
Overscan
Can be used to adjust the aspect ratio of the input signal received by
your monitor to adjust the image so it appears on the monitor.
Offset
Adjusts black levels for red, green and blue.
The gain and offset functions allow users to control the white balance for
the upmost control when manipulating contrast and dark scenes.
35