Table of Contents
Advertisement
VG2248
Display
User Guide
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service. Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found on
our web site at http://www.viewsonic.com in English, or in specific languages using
the Regional selection box in the upper right corner of our website. "Antes de operar
su equipo lea cu idadosamente las instrucciones en este manual"
Model No. VS17350
P/N: VG2248
Advertisement
Table of Contents
Related Manuals for ViewSonic VS17350
Summary of Contents for ViewSonic VS17350
- Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
- Page 2 Thank you for choosing ViewSonic As a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
-
Page 3: Table Of Contents
Contents 1. Cautions and Warnings ........1 2. Getting Started ........... 4 2-1. Package Contents ............. 5 2-2. The Exterior of the Monitor ..........6 2-3. Hardware Installation ............7 2-4. Quick Installation ............. 14 2-5. Power On ................ 17 2-6. - Page 4 8. Compliance Information ........46 8-1. FCC Compliance Statement ........... 46 8-2. Industry Canada Statement ..........47 8-3. Declaration of RoHS2 Compliance ......... 47 8-4. Indian Restriction of Hazardous Substances ....49 8-5. Product Disposal at End of Product Life ......49 9.
-
Page 5: Cautions And Warnings
1. Cautions and Warnings 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings and follow all instructions. 4. Sit at least 18” / 45cm from the monitor. 5. When installing the monitor, please leave 10cm of open space around the monitor for ventilation safety purposes. - Page 6 15. If smoke appears, an abnormal noise, or a strange odor is present, immediately switch the display off and call your dealer or ViewSonic. It is dangerous to continue using the display. 16. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.
- Page 7 22. Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.
-
Page 8: Getting Started
2. Getting Started Should problems arise and the product you have purchased needs to be returned for any reason, please keep the original packaging, registration form, and receipt. Having these items will make it easier for you to verify your product and repair, refund and/or return your product to you. -
Page 9: Package Contents
2-1. Package Contents Your monitor package includes: • Monitor • Power cord • Video cable • USB cable • Quick Start Guide NOTE: The video cables included in your package may vary depending on your country. Please contact your local reseller for more information. -
Page 10: The Exterior Of The Monitor
2-2. The Exterior of the Monitor A. Front B. Left and Right C. Rear 1. Control panel (Expanded in 3-1) 2. I/O port (input/output) This area should include all I/O connection options, as well as the power input connector (Expanded in 2-4) 3. -
Page 11: Hardware Installation
2-3. Hardware Installation A. Base Attachment B. Base Removal Procedure Procedure... - Page 12 C. Adjusting the Monitor’s Height - Push the top of the monitor downward until it is at the desired viewing height for use. - You can also pull the monitor back up, to the desired viewing height for use.
- Page 13 D. Adjusting the Angle - After adjusting the monitor’s height, stand in front of the monitor so it is centered in front of you. - The angle of the screen can be adjusted by moving the panel, angling it forward or back. Rear Side Front Side *Adjustment angles vary depending on each individual model.
- Page 14 E. Pivot Feature 1. Lift/raise the monitor as high as it can go (max height). 2. Adjust the monitor, angling the top back and pull the bottom forward (see the below picture for reference).
- Page 15 3. Rotate the monitor clockwise and counterclockwise, (see the below picture for reference). 4. Finish the monitor installation by fully rotating the monitor 90°(see the below picture for reference). *This picture is for reference only...
- Page 16 F. Wall Mounting (Optional) NOTE: For use only with a UL Listed Wall Mount Bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic or your local dealer. Refer to the instructions that come ® with the base mounting kit. To convert your display from a desk- mounted to a wall-mounted display, do the following: 1.
- Page 17 G. Using the security slot The security slot is located on the back side of the monitor. For more information on installation and usage, please refer to the user guide of the security slot you applied. Below is an example of setting up the security slot on a table for your reference.
-
Page 18: Quick Installation
2-4. Quick Installation Connect Video Cable 1. Make sure both the LCD monitor and computer are turned OFF. 2. Remove rear panel covers if necessary. 3. Connect the video cable from the LCD monitor to the computer. Up Stream HDMI AC In DisplayPort D-Sub... - Page 19 A. Power Cable (and AC/DC adapter if required) Connect the female connector of AC power cord to the power connector of monitor, and the AC plug of AC power cord to the AC outlet. B. Video and Audio Cable Connect one end of the DisplayPort cable to the DisplayPort or mini DP connector on the rear of the monitor*.
- Page 20 * Please do not connect the DP out on the monitor to the DisplayPort or mini DP connector on the computer. DP out is used for daisy chain connection (Explained in section D) *This picture is for reference only...
-
Page 21: Power On
2-5. Power On Turn On LCD Monitor and Computer Turn ON the LCD Monitor, then turn ON the computer. This particular order (LCD monitor before computer) is important. NOTE: Windows users may receive a message asking them to install the INF file. Windows Users: Set the Timing Mode For instructions on changing the resolution and refresh rate, see the graphics card’s user guide. -
Page 22: Driver Installation (Windows 10 Setup)
*This picture is for reference only If your PC has not auto-detected the monitor, but is still functioning, you can download the driver from ViewSonic website and install it then restart.your computer and follow the steps above again. It is not imperative for your computer to detect the monitor for normal use, but it is recommended. -
Page 23: Adjusting The Screen Image
3. Adjusting the Screen Image 3-1. Using the Control Panel Use the buttons on the front or rear control panel to display and adjust OSD……... - Page 24 Bezel & OSD symbol explanation The bezel symbol explanation is stated below: Standby Power On/Off NOTE: Power light Blue = ON Orange = Power Saving View Mode icon that allows users to choose which View mode setting they would like to activate for monitor use. Display the Menu by pressing any Function button.
- Page 25 The OSD Menu and OSD Quick-Menu Symbol explanations and their functional uses are stated below. Activation symbol to turn the various modes on when operating the menu system. Activation symbol to exit, go back or deactivate the desired function that is selected. Scrolls through menu options and adjusts the monitor controls.
- Page 26 The Quick-Menu symbol explanation is stated below: 1. To display the Quick Menu, press any one of the button on the slim bezel [ NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu.
-
Page 27: Monitor Optimization
3-2. Monitor Optimization • Adjust the computer’s graphics card to support a recommended timing mode (refer to “Specifications” page for recommended resolution setting specific to your LCD monitor). To find instructions on “changing the refresh rate”, please refer to the graphics card’s user guide. -
Page 28: Additional Software Installation (Optional)
Contact your computer or video card manufacturer to obtain the latest driver. 3-4. Additional Software Installation (Optional) 1. Load the ViewSonic CD on your CD/DVD drive. 2. Double click on the "Software" folder and choose an application, if desired. -
Page 29: Osd Menu Introduction
4. OSD Menu Introduction 4-1. OSD Menu Tree For an explanation of the OSD tree and pertaining functions, please refer to the 4-2 OSD explanation below. The OSD tree visually represents the complete OSD menu that can be accessed by your monitor. - Page 30 Menu D-Sub Input Select HDMI DisplayPort Volume 0-100 Audio Adjust Mute Text Low Input Lag On/Off Black Stabilization 0-100 Advanced DCR 0-100 Blue Light Filter 0-100 Standard/ Response Time Advanced/Ultra Office Fast Custom 1, 2, 3 Red/Green/Blue/ Cyan/Magenta/ Yellow (0-100) ViewMode Red/Green/Blue/ Saturation...
- Page 31 Menu Contrast 0-100 Contrast/ Brightness Brightness 0-100 Bluish Cool Native Color Warm Temperature 0-100 User Color Green 0-100 Blue 0-100 Auto Color Adjust Color Space Auto Color Range Full Range Limited Range Gamma Auto Image Adjust Horizontal Size 0-100 Horizontal 0-100 Position H./V.
- Page 32 Menu English Français Deutsch Español Italiano Suomi Русский Language Türkçe 日本語 한국어 繁體中文 简体中文 Czech Svenska Resolution Notice Setup Menu (Information Information message) OSD Timeout 0-60 Background 0° OSD Pivot 90° -90° Power Indicator Auto Power 30 Minutes 45 Minutes Sleep 60 Minutes 120 Minutes...
- Page 33 Menu Standard ECO Mode Optimize Conserve DisplayPort 1.2 Setup Menu DDC/CI Auto Detect ALL Recall...
-
Page 34: Osd Menu Explanation
Auto Detect The Auto-Detect function is not supported by VP2771. Black stabilization ViewSonic’s Black stabilization provides heightened visibility and detail by brightening dark scenes. Blue light filter Adjusts the filter that blocks high-energy blue light for a safer experience for our users. - Page 35 Color adjust Provides several color adjustment modes, to help adjust the color settings to fit our users’ needs. Color Format Adjusts the color range, allowing users to adjust the range and color spacein RGB and YUV color settings. Color temperature Allows users to select specific color temperature settings to further customize their viewing experience.
- Page 36 (Full Range) The input signal color format is YUV and the black white level is limited (Limited Range) Color Calibration User can calibrate the monitor by ViewSonic Colorbration application with specific color sensor. Options Explanation CAL1 Display with the 1...
- Page 37 Game mode Integrating a gaming-oriented OSD design including pre-calibrated FPS, RTS and MOBA gaming settings, each mode is functionally customized with in-game testing and adjustments made for the best blend of color and technology. Gain Adjust white temperature to customize your USER COLOR (can be saved in User Mode) or a specific color temperature and gain value (red, green, blue) use this setting.
- Page 38 Toggles between the various input options that are available for that particular monitor. Low input lag ViewSonic offers low input lag, utilizing a monitor process reducer, which decreases signal latency. Under the low input lag submenu, you can select the appropriate speed for your desired use from the two options...
- Page 39 Manual image adjust Displays the Manual Image Adjust menu. You can manually set a variety of image quality adjustments. Multi-picture Under MULTI-PICTURE MODE you can select the following settings, PBP LEFT-RIGHT, and PIP. The explanations for each setting are below. 1.
- Page 40 Overscan Can be used to adjust the aspect ratio of the input signal received by your monitor to adjust the image so it appears on the monitor. Offset Adjusts black levels for red, green and blue. The gain and offset functions allow users to control the white balance for the upmost control when manipulating contrast and dark scenes.
- Page 41 Response time Adjusts the response time, creating smooth images without streaking, blurring or ghosting. A low response time is perfect for the most graphic- intense gaming, and provides amazing visual quality while watching sports or action movies. Resolution notice The notice tells users that the current viewing resolution is not the correct native resolution.
- Page 42 The Uniformity Correction function compensates any luminance and color uniformity imbalance on the screen, such as dark spots, uneven brightness, or illegible images on the screen. With the ViewSonic uniformity correction function, gray-scale levels become more balanced, and delta E scores are improved which increases reliability and provides the highest quality viewing experience from every monitor.
- Page 43 Calculating Breaks When viewing the monitor for extended periods, it is recommended to take periodic breaks from viewing. Short breaks of at least 5 minutes are recommended after 1 -2 hour of continuous viewing. Taking shorter, more frequent breaks are generally more beneficial than longer, less frequent breaks.
-
Page 44: Monitor Setting Management
4-3. Monitor Setting Management OSD Timeout The OSD Timeout function, allows users to choose how long the OSD will reside on the screen after in-activity (number of seconds). OSD Background The OSD Background function allows users to turn off the OSD background while selecting and adjusting OSD settings. -
Page 45: Specifications
5. Specifications Display Type a-Si TFT active matrix 1920X1080LCD 0.24795 (H) x 0.24795 (V) mm pixel pitch Display Size Metric: 54.6 cm Imperial: 21.5” (21.5” viewable) Color Filter RGB vertical stripe Glass Surface AG type, 3H hard coating, Haze 25 Input Signal Video Sync TMDS digital (100ohms) - Page 46 Wall Mount Hole pattern Interface Pad Screw Q’ty & Loading (W x H; mm) (W x H x D) Hole Specification 115 mm x 100mm x Ø 4 piece 14kg 115 mm x 100mm M4 x 10mm 2.6 mm Weight Physical 11.9 lbs (5.4 kg) Power...
-
Page 47: Troubleshooting
Loose or broken pins in the cable connector could cause an improper connection. • Connect the display to another computer. • If you have an older graphics card, contact ViewSonic® for a non-DDC adapter. Control buttons do not work... -
Page 48: Cleaning And Maintenance
7. Cleaning and Maintenance Safe Cleaning Practices • Make sure the display is turned off. • Never spray or pour any liquid directly onto the screen or case. To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. - Page 49 Some chemical cleaners have been reported to damage the screen and/or case of the display. • ViewSonic will not be liable for damage resulting from use of any ammonia or alcoholbased cleaners. Caution: Handle the monitor on the edges only.
-
Page 50: Compliance Information
8. Compliance Information NOTE: This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on unit. 8-1. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause... -
Page 51: Industry Canada Statement
8-2. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) 8-3. Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown... - Page 52 Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as noted below: Examples of exempted components are: 1. Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp): (1) Short length (≦500 mm): maximum 3.5 mg per lamp.
-
Page 53: Indian Restriction Of Hazardous Substances
0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. 8-5. Product Disposal at End of Product Life ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. -
Page 54: Copyright Information
® for energy efficiency. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 55: Service Information
Warranty and entitles you to receive new product updates and information if desired. Please complete this form to register your new product, then mail/fax to ViewSonic using the information provided on the following page. Items marked with an asterisk (*) are required. -
Page 56: Customer Service
NOTE: You will need the product serial number. Asia pacific Country/ Website T= Telephone Email Region C = CHAT ONLINE T= 886 2 2246 3456 ViewSonic service@tw.viewsonic. http://www.viewsonic.com.tw/ F= 886 2 2249 1751 Corporation Toll Free= 0800-899880 service.cn@ China www.viewsonic.com.cn T= 4008 988 588 cn.viewsonic.com... - Page 57 Europa www.viewsoniceurope.com/es/ service_es@ Spain www.viewsoniceurope.com/es/ support/call-desk/ viewsoniceurope.com Latinoamérica soporte@viewsonic. www.viewsonic.com/la/ T= 001-8882328722 (México) Italia e altri paesi di lingua http://www.viewsoniceurope. service_it@ www.viewsoniceurope.com italiana in com/eu/support/call-desk/ viewsoniceurope.com Europa Polska i inne http://www.viewsoniceurope.
- Page 58 America AUS= 1800 880 818 Australia service@ www.viewsonic.com.au New Zealand au.viewsonic.com NZ= 0800 008 822 service.ca@viewsonic. Canada www.viewsonic.com T= 1-866-463-4775 C= https://www.viewsonic. soporte@viewsonic. Latin America www.viewsonic.com/la/ com/la/soporte/servicio- tecnico-la/ service@ Middle East ap.viewsonic.com/me/ Contact your reseller ap.viewsonic.com service.us@viewsonic. T= 1-800-688-6688 (English) Puerto Rico &...
-
Page 59: Limited Warranty
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components. - Page 60 6. Removal or installation of the product. 7. Causes external to the product, such as electric power fluctuations or failure. 8. Use of supplies or parts not meeting ViewSonic's specifications. 9. Normal wear and tear. 10. Failure of owner to perform periodic product maintenance as stated in User Guide, such as cleaning of user-cleanable projector filters.
- Page 61 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic. Limitation of implied warranties:...
- Page 62 Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product,...
- Page 63 Sales outside the U.S.A. and Canada: For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact ViewSonic or your local ViewSonic dealer. The warranty period for this product in mainland China (Hong Kong, Macao and Taiwan Excluded) is subject to the terms and conditions of the Maintenance Guarantee Card.
-
Page 64: Mexico Limited Warranty
Display ® What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. - Page 65 Causes external to the product, such as electrical power fluctuations or failure. Use of supplies or parts not meeting ViewSonic's specifications. Normal wear and tear. Any other cause which does not relate to a product defect.
- Page 66 How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support page). You will need to provide your product's serial number, so please record the product information in the space provided below on your purchase for your future use.
- Page 67 Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product,...
- Page 68 Tel: (52) 999-925-1916 Tel: 01(52)95-15-15-22-22 E-Mail: rrrb@sureste.com Fax: 01(52)95-15-13-67-00 E-Mail. gpotai2001@hotmail.com Tijuana: FOR USA SUPPORT: ViewSonic Corporation Av Ferrocarril Sonora #3780 L-C 381 Brea Canyon Road, Walnut, CA. 91789 USA Col 20 de Noviembre Tel: 800-688-6688 Tijuana, Mexico E-Mail: http://www.viewsonic.com...