Introduction
Remote Control Battery Replacement
The Remote Control has a child resistant battery compartment which
requires a pointed object to open the battery compartment . A paper clip is
recommended, as shown .
To Replace the Battery:
1. Press the paper clip or
other object into the
lock release opening
on the Remote
Control, and slide the
battery compartment
cover off of the
Remote Control .
2. Slide the battery
out of the battery
compartment .
3. Replace with a new
battery . Observe the
correct orientation of the
battery; the + positive side
of the battery should be
facing up .
4. Replace the battery
compartment cover .
Paper Clip
Lock Release
Battery
Compartment
Cover
Battery
11