Using The Wireless Controls; Using The Wireless Action Key; Using Hp Connection Manager (Select Models Only) - HP Compaq Mini 110c-1001 User Manual

Icon

Using the wireless controls

You can control the wireless devices in your computer using these features:
●
The f12
●
HP Connection Manager software (select models only)
● Wireless Assistant software (select models only)
●
Operating system controls

Using the wireless action key

The computer has a wireless action key (f12), one or more wireless devices, and one wireless light. All
of the wireless devices on your computer are enabled at the factory.
The wireless light indicates the overall power state of your wireless devices, not the status of individual
devices. If the wireless light is white, at least one wireless device is on. If the wireless light is off, all
wireless devices are off.
Because the wireless devices are enabled at the factory, you can use the wireless action key (f12) to
turn on or turn off all of the wireless devices simultaneously.

Using HP Connection Manager (select models only)

You can use HP Connection Manager to connect to WWANs using the HP Mobile Broadband device in
your computer (select models only).
To start Connection Manager, click the Connection Manager icon in the notification area, at the
▲
far right of the taskbar.
– or –
Select Start > All Programs > HP Connection Manager > HP Connection Manager.
For more details about using Connection Manager, refer to the Connection Manager software Help.
30 Chapter 4 Internet
Name
Wireless network
connection
(disconnected)
Network status
(connected)
Network status
(disconnected)
wireless action key
Description
Indicates that one or more of your WLAN devices are not connected to
a network.
Indicates that one or more of your LAN drivers are installed and one or
more LAN devices are connected to the network.
Indicates that one or more of your LAN drivers are installed but no LAN
devices are connected to the network.